Battery Wire Cable Crimping Tool ED-6b for Copper Lug and Terminals

• Certification: RoHS, ISO, CE
• Condition: New
• Automatic Grade: Manual
• Usage: Construction
• Type: Hydraulic Crimping Tools
• Transport Package: Carton/Pallet
• Model NO.: Ed-6B
• Origin: China
• Production Capacity: 1000PCS/Month

Product Description

Battery powered wire crimping tool ED-6B for copper lug and terminals

Model	ED-6B
Crimping Force	60KN
Stroke	35mm
Crimps per charge	250 times( Cu 150mm²)
Crimping cycle	3s-6s(depend on the size of cable)
Battery voltage	18V
Battery capacity	3.0 Ah
Charging time	2 hours
Package	Plastic box
Accessories
Battery	2pcs
Charger	1pcs
Sealing ring of cylinder	1set
Sealing ring safety valve	1set

 

1. The unit is equipped with a double piston pump which is characterized by a rapid approach of the dies forwards the connector and a slow crimping motion

2. The hydraulic unit incorporates an automatic retraction which returns the piston into its starting position when the maximum operating pressure is reached.

3. A manual retraction allows the user to return the piston into the starting position in case of an incorrect crimp. The unit is equipped with a special break when stops the forward motion of the piston& die when the button is pressed.

4. If a deviation from the set operating pressure or low battery charges is identified, an acoustic signal sounds and a red display flashes.

5. The crimping head can be smoothly turned by 350 degrees around the longitudinal axis in order to gain better access to tight corners and other difficult working areas.

6. Li-ion batteries do neither have a memory effect nor self-discharge. Even after long periods of non operating the tool is always ready to operate. In addition, we see a lower power-weight ratio with 50% more capacity and shorter charging cycles compare to NiMH batteries.